CNB ID2810PVF - Manual (Page 33)

XNET Network Dome Camera User’s Guide
5.9. Encryption Set up
Figure 5-13. Encryption Setup
For additional security to the video and audio data transmitted from the network camera, you
can set key codes and use them for encrypting the data from the network camera.
You can selectively activate encryption for the video and audio data. For enabling the encryption,
check at the box at the left of the “Enable data encryption” then check at the proper check
boxes at the left of “Video” and “Audio”. After the selection, click on SAVE button beneath the
“Video” and “Audio” check boxes.
Field/Button
Sub Field
/Button
Description
Check at this box to apply data encryption.
If it is unchecked encryption is applied on neither video nor
audio data regardless of the selection below.
Video Check to enable encryption on the video data.
Audio Check to enable encryption on the audio data.
Enable Data
Encryption
SAVE After the selection, click on SAVE button.
33 of 44