CNB ID2810PVF - Manual (Page 15)

XNET Network Dome Camera User’s Guide
4. IP-Installer
XNET/XNET-Wireless needs IP network parameters for connection to the network
(Internet/Intranet). IP-Installer is a PC program for the initial network configuration to IP video
products such as Network Camera or A/V Server. IP-Installer is provided in a CD supplied with
XNET/XNET-Wireless or it can be downloaded from “www.cnbtec.com”.
Detailed information of Installing and running IP-installer can be found in [IP-
installer user’s guide]
4.1. Main window of IP-Installer
Figure 4-1. IP Installer
All the basic network parameters needed for the initial connection to IP video products can be
assigned by IP-Installer. Once the basic parameters are assigned and the initial connection is
successfully made, you can connect to the administration page for more sophisticated control of
the network parameters and other operational parameters. Refer to Chapter 5 for more details
of the administration page.
5. Configuring XNET in Administrative Mode
5.1. Log On
There are two ways of connecting to XNET/XNET-Wireless administrative mode. One is through
Internet Explorer (IE) and the other is through “
XNET-NVR ” or “ XNET-XNVR ” program. But
this user’s guide will explain accessing by IE and “ XNET-NVR ” only. (Please refer to the XNVR
user’s guide in the supplied CD for using “ XNET-XNVR ”.)
15 of 44