CNB IDC4000T - Manual (Page 29)

XNET User Manual
29 / 30
1.17. Configuration Event Type
This is related to XNET’s event information.
Click [Event Type] to view page shown in Figure 1-17.
Figure 1-17
Item Sub Item Description
Event Mode
Sensor Enables or disables the alarm sensor.
Motion
Detection
Enables or disables the motion detection.
Event Output
Event
Information
Transfer to FTP
This allows Alarm images to be uploaded to an
FTP server when processing an event.
Event
Information
Transfer to
SMTP
This allows Alarm images to be sent out by an e-
mail when processing an event.
Alarm Output
This sends out Alarm signal to its output port
during event processing.
Table 1-15