CNB IDC4000T - Manual (Page 21)

XNET User Manual
21 / 30
1.10. Configuration Audio
XNET’s audio features can be configured in this page.
Click [Audio] button to open the page shown in Figure 1-10.
Figure 1-10
Item Sub Item Description
Audio
Configuration
Audio Enable Enables or Disables audio feature.
Audio Input
Type
Select audio input source between Microphone
and line.
Microphone input can be used when users
send their voice over XNET system.
Line in takes the input from an audio device
to send over XNET. Audio sent to XNET can be
played at a Client’s PC or an audio device.
Alarm Sound
Volume
Select volume for alarm event sound.
Table 1-8