INTELLINET NETWORK 524827 GuestGate MK II User Manual - Manual (Page 40)

- 40 -
19. Q: Some of my guests wish to play a network game, or share files and folders. But
that does not work. How come the connected guest computers cannot communicate
with each other?
A:
That is because Layer 3 Client Isolation is activated by default. You need to
disable it to allow network communication between the connected guest computers.
See question 11.
20. Q: On the status page of the Web administration interface the time is displayed as
“(not available).” Why?
A: GuestGate cannot access the pool time servers on the Internet and is therefore
unable to receive a valid system time. The most likely cause for this problem is that
a firewall located in the host network may be blocking outgoing Network Time
Protocol (NTP) requests. The system administrator must open the ports required for
this service (port 123 for both TCP and UDP).
It is important to take care of this problem, especially if you use the Time / Scheduler
function to control when Internet access is allowed.
21. Q: Does the bandwidth control limit the bandwidth per computer, or does it limit the
bandwidth GuestGate can consume in total?
A:
The bandwidth control limits the bandwidth that GuestGate can use, regardless of
how many guest users are connected to the device.