INTELLINET NETWORK 524827 GuestGate MK II User Manual - Manual (Page 19)

- 19 -
CONFIGURATION OPTIONS
Status Screen
1. Network Information:
Basic information about the host network interface.
2. Device Information
: Display of the current firmware version, the system’s uptime and the
system time.
3. Device Status
Displays the status of the password-protected Internet access (“disabled” = no password
required) and the status of the Internet access (“enabled” = access to the Internet is active).
4. Connected Guest computers
GuestGate shows all of the connected guest computers, including the MAC address, the
assigned IP address and the connection time. Click on “Details” to view individual statistics
for each connected PC, including the bandwidth consumed (Mbytes). Click on “Disconnect”
to terminate the connection of the selected computer. If no information is shown for “Logged
In,” it means that the user is attached to GuestGate, but has not gotten past the welcome
page.