Hardware description, 1 dimensions, 2 appearance & front panel – INTELLINET NETWORK 560900 24 Ports Gigabit + 4 Gigabit SFP PoE+ Web Management Ethernet Switch User Manual User Manual

Page 8

2. Hardware Description

This section primarily presents the hardware of the switch, physical dimensions, appearance,
front panel, rear panel and LED indicators.

2.1 Dimensions

45 Ч 440 Ч 330 mm (H × W × D)

2.2 Appearance & Front Panel

The front panel of the switch consists of 24 gigabit RJ45 ports. Four of the gigabit RJ45 ports
(Ports 1–4) are in combo with the four gigabit SFP open slots. The LED Indicators are also
located on the front panel.

Appearance

Front Panel

Note 1: The SFP ports are shared with normal RJ45 ports 1, 2, 3 and 4. For example: The
RJ45 Port 1 can not be used when SFP Port 1 is linked to a device.

Note 2: Press the Reset button for 5 seconds and the system configuration will be reset to the
default settings.

LED Display

RJ-45 Port
IEEE 802.3at PSE

4 RJ-45/SFP
Combo ports

Reset Button