beautypg.com

10 qos – INTELLINET NETWORK 560900 24 Ports Gigabit + 4 Gigabit SFP PoE+ Web Management Ethernet Switch User Manual User Manual

Page 25

background image

24  

 

4.1.10 QoS

In QoS Mode, select QoS Disabled, 802.1p or DSCP to configure the related parameters.

QoS Mode: QoS Disabled

When the QoS Mode is set to QoS Disabled, the QoS is disabled.

QoS Mode: 802.1p

Packets are prioritized using the 802.1p field in the VLAN tag. This field is three bits long,

representing the values 0 - 7. When the QoS Mode is set to 802.1p, the 802.1p Configuration

table appears, allowing you to map each of the eight 802.1p values to a local priority queue

(low, normal, medium or high). The default settings are shown below.

When the QoS Mode is set to 802.1p, the 802.1p Configuration table is displayed as shown

below. The Custom Prioritize Traffic is the default and suggested value.

See also other documents in the category INTELLINET NETWORK Accessories communication: