INTELLINET NETWORK 560900 24 Ports Gigabit + 4 Gigabit SFP PoE+ Web Management Ethernet Switch User Manual - Manual (Page 13)

12
4. Web UI Configuration
This part instructs you how to set up and manage the switch through the Web user
interface.
4.1 Configuration
This section shows how to configure the switch settings.
4.1.1 System Configuration
What follows is system configuration information.
 MAC Address: Displays the unique hardware address assigned by the manufacturer
(default).
 S/W Version: Displays the switch’s firmware version.
 H/W Version: Displays the switch’s hardware version.
 Active IP Address: The current active IP address of the switch.
 Active Subnet mask: The current active subnet mask of the IP address.
 Active Gateway: The current active gateway of the switch.
 DHCP Server: The IP of the DHCP server. Displays after DHCP Client is enabled.
 Lease Time Left: Display after DHCP Client is enabled.