INTELLINET NETWORK 560900 24 Ports Gigabit + 4 Gigabit SFP PoE+ Web Management Ethernet Switch User Manual - Manual (Page 22)

21
The RADIUS servers make the network a lot easier to manage for the administrator by
gathering and storing the user lists.
 Mode: By default, 802.1x is disabled. To use EAP for security, select enabled and set the
802.1X Global Settings for the Radius Server and applicable authentication information.
 RADIUS server IP: The IP Address of the external Radius Server, you need to specify an
RADIUS server to enable 802.1X authentication.
 RADIUS UDP Port: The UDP port used for the communication between the switch and
RADIUS server.
 RADIUS Secret: The Key used for the communication between the switch and RADIUS
server.
 Port: The port ID.
 Admin State: There are 3 types: Auto, Force Authorized and Force Unauthorized.
- Auto: Select Auto when you enabled the IEEE 802.1X. If the client is successfully
authorized, the port is authorized to be used as well. Otherwise, the port can’t be used.
- Force Authorized: The default value. Whether the IEEE 802.1X is enabled or not, the port
is always authorized to be used.
- Force Unauthorized: Whether the IEEE 802.1X is enabled or not, the port is always
unauthorized to be used.
 Port State: It indicates the status of the port. Authorized means the port is successfully
authorized by the RADIUS server or the port is configured as “Force Authorized.”
 Others: Re-authenticate allows restart the authentication process, Force Reinitialize
reinitializes the process and Statistics displays the IEEE 802.1X counters and information
of each port.