Adaptec 5ANA-940 User Manual
User’s guide
This manual is related to the following products:
Table of contents
Document Outline
- Cover Title 1 - ANA5910/5930/5940
- 7-Title Tbl of Con - Contents
- 0-Chap TitleTOC - 1 Getting Started
- 0-Chap TitleTOC - 2 Introducing ATM Networking
- 0-Chap TitleTOC - 3 Installing the Adapter
- 0-Chap TitleTOC - 4 Installing ATM Version 4.0x Software for Windows...
- 0-Chap TitleTOC - 5 Installing ATM Version 2.0x Drivers for Windows ...
- 0-Chap TitleTOC - 6 Installing ATM Software for DOS/Windows 3.1
- 0-Chap TitleTOC - 7 Installing ATM Software for Windows 95
- 0-Chap TitleTOC - 8 Installing ATM Software for Novell NetWare
- 0-App TitleTOC - A Product Features and Specifications
- 0-App TitleTOC - B Windows NT Specific Error Messages and Diagnosti...
- 0-Chap Number - 1
- 0-Chap Number - 2
- 0-Chap Number - 3
- 0-Chap Title - Installing the Adapter
- 3-Start Number - 1 Turn off the computer and any attached devices, ...
- 3-Number - 2 Detach all cables from the back of the computer....
- 3-Number - 3 Remove the cover from the computer case. Refer t...
- 3-Number - 4 Locate an available PCI slot, and remove the slo...
- 3-Number - 5 Carefully remove the card from its antistatic pa...
- 3-Number - 6 Align the adapter with the PCI expansion slot, a...
- 3-Number - 7 Attach the adapter bracket to the computer chass...
- 3-Number - 8 Reassemble the computer and replace the cover on...
- 1-1Head - Connecting the ANA5910/5930/5940 Adapter to the N...
- 1-2Head - Connecting to the ANA5910
- 1-2Head - Connecting to the ANA5930
- 1-2Head - Connecting to the ANA5940
- 3-Start Number - 1 Obtain an MMF cable with an SC connector on one ...
- 3-Number - 2 Remove the soft rubber cover on the back bracket...
- 3-Number - 3 Remove the rubber terminators from the ends of t...
- 3-Number - 4 Attach the SC connector on the MMF cable to the ...
- 3-Number - 5 Attach the other end of the MMF cable to the ATM...
- 0-Chap Title - Installing the Adapter
- 0-Chap Number - 4
- 0-Chap Title - Installing ATM Version 4.0x Software for Windows N...
- 1-1Head - Installation for Windows NT (version 4.0)
- 1-2Head - Installing LANE Device Drivers
- 1-3Head - Installing a LANE Client Driver
- 3-Start Number - 1 From the Control Panel window, double-click on t...
- 3-Number - 2 Select the Adapters tab from the Network Setting...
- 3-Number - 3 Click on the Add button to add a device driver.
- 3-Number - 4 Insert the ALANE Drivers for Windows NT diskette...
- 3-Number - 5 Type the drive letter of the diskette drive that...
- 3-Number - 6 Select Adaptec Inc. ATM LANE Adapter, and select...
- 3-Number - 7 Select OK to exit the Network Settings dialog bo...
- 3-Number - 8 Enter Bus Type and Number from the dialog box an...
- 3-Number - 9 Select Close from the Network Control Panel wind...
- 3-Number - 10 If IPX/SPX is installed on your workstation, th...
- 3-Number - 11 If TCP/IP is installed on your workstation, the...
- 3-Number - 12 Add additional clients (1 to 3) by following th...
- 1-3Head - Reconfiguring a LANE Client
- 1-3Head - Removing a LANE Client
- 3-Start Number - 1 From the Control Panel window, double-click on t...
- 3-Number - 2 From the Network Settings dialog box, select the...
- 3-Number - 3 Select the LANE adapter you want to remove, such...
- 3-Number - 4 Select Yes.
- 3-Number - 5 In the Network Settings dialog box, select Close...
- 3-Number - 6 Select Yes.
- 3-Number - 7 If you want to reinstall the adapter you just re...
- 1-3Head - Installing a LANE Client Driver
- 1-2Head - Installing The ATM Utilities
- 3-Start Number - 1 Select Start, Settings, then Control Panel.
- 3-Number - 2 From the Control Panel window, click on the Netw...
- 3-Number - 3 Select the Protocols tab from the Network Settin...
- 3-Number - 4 Click the Add button to add a device driver.
- 3-Number - 5 Insert the ALANE Utilities for Windows NT disket...
- 3-Number - 6 Type the drive letter of the diskette, and selec...
- 3-Number - 7 Select Adaptec ATM Utilities, and select OK.The ...
- 3-Number - 8 Select Close.
- 1-2Head - Installing LANE Device Drivers
- 1-1Head - Installation for Windows NT (version 3.51)
- 1-2Head - Installing LANE Device Drivers
- 1-3Head - Installing a First or Single LANE Client Driver
- 3-Start Number - 1 In the Control Panel window click on the Network...
- 3-Number - 2 From the Network Settings dialog box, select Add...
- 3-Number - 3 Select
Requires disk from manufacturer f... - 3-Number - 4 Insert the ALANE Drivers for Windows NT diskette...
- 3-Number - 5 Type the drive letter of the diskette drive that...
- 3-Number - 6 Select Adaptec Inc. ATM LANE Adapter, and then s...
- 3-Number - 7 Select OK to exit the Network Settings dialog bo...
- 3-Number - 8 Enter Bus Type and Number from the dialog box an...
- 3-Number - 9 Select OK from the Network Control Panel window....
- 3-Number - 10 If IPX/SPX is installed on your workstation, th...
- 3-Number - 11 If TCP/IP is installed on your workstation, the...
- 3-Number - 12 Add additional clients (1 to 3) by following th...
- 1-3Head - reconfiguring a LANE Client
- 1-3Head - Removing a LANE Client
- 3-Start Number - 1 In the Program Manager’s Main group window, sele...
- 3-Number - 2 Select the Network icon.
- 3-Number - 3 Select the LANE adapter you want to remove, such...
- 3-Number - 4 Select Yes.
- 3-Number - 5 In the Network Settings dialog box, select OK.
- 3-Number - 6 Select Restart Now to save and initialize change...
- 1-3Head - Installing a First or Single LANE Client Driver
- 1-2Head - Installing The ATM Utilities
- 3-Start Number - 1 In the Program Manager’s Main group window, sele...
- 3-Number - 2 Select the Network icon.
- 3-Number - 3 Select Add Adapter from the Network Settings dia...
- 3-Number - 4 Select
Requires disk from manufacturer f... - 3-Number - 5 Insert the ALANE Utilities for Windows NT disket...
- 3-Number - 6 Type the drive letter of the diskette drive that...
- 3-Number - 7 Select Adaptec ATM Utilities, and then select OK...
- 3-Number - 8 Select Close.
- 1-2Head - Installing LANE Device Drivers
- 1-1Head - Using Device Drivers and Utilities
- 1-1Head - Locating Files and Directories
- 1-1Head - Installation for Windows NT (version 4.0)
- 0-Chap Title - Installing ATM Version 4.0x Software for Windows N...
- 0-Chap Number - 5
- 0-Chap Title - Installing ATM Version 2.0x Drivers for Windows NT...
- 1-1Head - Installation for Windows NT (version 4.0)
- 1-2Head - Installing CIP Client Drivers
- 3-Start Number - 1 From the Control Panel window, double-click on t...
- 3-Number - 2 Select the Adapters tab from the Network Setting...
- 3-Number - 3 Insert Device Driver for Windows NT Disk 1 in th...
- 3-Number - 4 Type the drive letter of the diskette drive that...
- 3-Number - 5 Select Adaptec Inc.ATM ANA-59x0 Adapter(CIP), an...
- 3-Number - 6 Add PVCs as follows:
- 3-Number - 7 Change any of the editable parameters in the Ada...
- 3-Number - 8 Select PCI from the Bus Type drop-down list in t...
- 3-Number - 9 When the Setup Message dialog box appears, inser...
- 3-Number - 10 If NT SNMP has not been installed on your works...
- 3-Number - 11 Select Close to exit the Network Settings dialo...
- 3-Number - 12 If TCP/IP is installed on your workstation, the...
- 3-Number - 13 Select Yes to save and initialize changes.
- 1-2Head - Installing LANE Device Drivers
- 1-3Head - Installing a LANE Client Driver
- 3-Start Number - 1 From the Control Panel window, double- click on ...
- 3-Number - 2 From the Network Settings dialog box, select the...
- 3-Number - 3 Click on the Add button to add a device driver.
- 3-Number - 4 Insert the LAN Emulation Client diskette in the ...
- 3-Number - 5 Select the Have Disk button.
- 3-Number - 6 Select the drive letter of the diskette drive th...
- 3-Number - 7 Select Adaptec Inc. ATM LANE Adapter, and then s...
- 3-Number - 8 Select OK to exit the Network Settings dialog bo...
- 3-Number - 9 If IPX/SPX is installed on your workstation, the...
- 3-Number - 10 If TCP/IP is installed on your workstation, the...
- 3-Number - 11 Add additional clients (1 to 3) by following th...
- 1-3Head - Reconfiguring a LANE Client
- 1-3Head - Removing a LANE client
- 3-Start Number - 1 From the Control Panel window, double-click on t...
- 3-Number - 2 From the Network Settings dialog box, select the...
- 3-Number - 3 Select the LANE adapter you want to remove, such...
- 3-Number - 4 Select Yes.
- 3-Number - 5 In the Network Settings dialog box, select Close...
- 3-Number - 6 Select Yes to save and initialize changes.
- 1-3Head - Installing a LANE Client Driver
- 1-2Head - Installing the CIP ARP Server (Optional)
- 3-Start Number - 1 From the Control Panel window, double-click on t...
- 3-Number - 2 From the Network Settings dialog box, select the...
- 3-Number - 3 Click on Add to add a protocol.
- 3-Number - 4 Select the Have Disk button.
- 3-Number - 5 Insert the RFC 1577 CIP ARP Server diskette in t...
- 3-Number - 6 Type the drive letter of the diskette drive that...
- 3-Number - 7 Select Adaptec ATM ARP Server, and then select O...
- 3-Number - 8 Remove the RFC 1577 CIP ARP Server diskette from...
- 3-Number - 9 Select Close to exit the Network Settings dialog...
- 3-Number - 10 Select Yes to save and initialize changes.
- 1-3Head - Determining the CIP ARP Server Address
- 1-3Head - Reconfiguring the CIP ARP Server
- 3-Start Number - 1 From the Control Panel window, double-click on t...
- 3-Number - 2 From the Network Settings dialog box, select the...
- 3-Number - 3 Select AARP Server, and then select Properties.
- 3-Number - 4 Select Close to exit the Network Settings dialog...
- 3-Number - 5 Select Yes to save and initialize changes.
- 1-3Head - Removing the CIP ARP Server
- 3-Start Number - 1 From the Control Panel window, double-click on t...
- 3-Number - 2 From the Network Settings dialog box, select the...
- 3-Number - 3 Select AARP Server and then select Remove.
- 3-Number - 4 Select Yes.
- 3-Number - 5 In the Network Settings dialog box, select Close...
- 3-Number - 6 Select Yes to save and initialize changes.
- 1-2Head - Installing CIP Client Drivers
- 1-1Head - Installation for Windows NT (version 3.51)
- 1-2Head - Installing CIP Client Drivers
- 3-Start Number - 1 In the Program Manager’s Main group window, sele...
- 3-Number - 2 Select the Network icon.
- 3-Number - 3 Select Add Adapter.
- 3-Number - 4 Select
Requires disk from manufacturer f... - 3-Number - 5 Insert Device Driver for Windows NT Disk 1 in th...
- 3-Number - 6 Type the drive letter of the diskette drive that...
- 3-Number - 7 Select Adaptec Inc.ATM ANA-59x0 Adapter(CIP), an...
- 3-Number - 8 Add PVCs as follows:
- 3-Number - 9 Change any of the editable parameters in the Ada...
- 3-Number - 10 Select PCI from the Bus Type drop-down list in ...
- 3-Number - 11 When the Setup Message dialog box appears, inse...
- 3-Number - 12 If NT SNMP has not been installed on your works...
- 3-Number - 13 Select OK to exit the Network Settings dialog b...
- 3-Number - 14 If TCP/IP is installed on your workstation, the...
- 3-Number - 15 Select Restart Now.
- 1-2Head - Installing LANE Device Drivers
- 1-3Head - Installing a LANE Client Driver
- 3-Start Number - 1 In the Program Manager’s Main group window, sele...
- 3-Number - 2 Select the Network icon.
- 3-Number - 3 Select Add Adapter from the Network Settings dia...
- 3-Number - 4 Select
Requires disk from manufacturer f... - 3-Number - 5 Insert the LAN Emulation Client diskette in the ...
- 3-Number - 6 Type the drive letter of the diskette drive that...
- 3-Number - 7 Select Adaptec Inc. ATM LANE Adapter, and then s...
- 3-Number - 8 Select OK to exit the Network Settings dialog bo...
- 3-Number - 9 If IPX/SPX is installed on your workstation, the...
- 3-Number - 10 If TCP/IP is installed on your workstation, the...
- 3-Number - 11 Add additional clients by following the above p...
- 1-3Head - reconfiguring a LANE Client
- 1-3Head - Removing a LANE client
- 3-Start Number - 1 In the Program Manager’s Main group window, sele...
- 3-Number - 2 Select the Network icon.
- 3-Number - 3 Select the LANE adapter you want to remove, such...
- 3-Number - 4 Select Yes.
- 3-Number - 5 In the Network Settings dialog box, select OK.
- 3-Number - 6 Select Restart Now to save and initialize change...
- 1-3Head - Installing a LANE Client Driver
- 1-2Head - Installing the CIP ARP Server (Optional)
- 3-Start Number - 1 In the Program Manager’s Main group window, sele...
- 3-Number - 2 Select the Network icon.
- 3-Number - 3 Select Add Software from the Network Settings di...
- 3-Number - 4 Select
Requires disk from manufacturer f... - 3-Number - 5 Insert the RFC 1577 CIP ARP Server diskette in t...
- 3-Number - 6 Type the drive letter of the diskette drive that...
- 3-Number - 7 Select Adaptec ATM ARP Server, and then select O...
- 3-Number - 8 Remove the RFC 1577 CIP ARP Server diskette from...
- 3-Number - 9 Select OK to exit the Network Settings dialog bo...
- 3-Number - 10 Select Restart Now to save and initialize chang...
- 1-3Head - Determining the CIP ARP Server Address
- 1-3Head - Reconfiguring the CIP ARP Server
- 1-2Head - Installing CIP Client Drivers
- 1-1Head - Using Device Drivers and Utilities
- 1-2Head - Stopping ATM Drivers
- 1-2Head - Starting ATM Drivers
- 3-Start Number - 1 In the Program Manager’s Main group window, sele...
- 3-Number - 2 Change to the directory where you installed the ...
- 3-Number - 3 Start the drivers you need to use by entering th...
- 1-3Head - aarpcnfg.exe
- 1-3Head - aatmcnfg.exe
- 1-3Head - aatmdiag.exe
- 1-3Head - aatmcons.exe
- 1-3Head - acipcnfg.exe
- 1-3Head - ndd.exe
- 1-1Head - Locating Files and Directories
- 1-1Head - Installation for Windows NT (version 4.0)
- 0-Chap Title - Installing ATM Version 2.0x Drivers for Windows NT...
- 0-Chap Number - 6
- 0-Chap Title - Installing ATM Software for DOS/Windows 3.1
- 1-1Head - Configuring the Novell NetWare Client Kit for DOS/...
- 3-Start Number - 1 Start the Novell NetWare Client installation, as...
- 3-Number - 2 In the NetWare Client Install screen, select OTH...
- 3-Number - 3 Remove the [NWClient] diskette from the floppy d...
- 3-Number - 4 From the Network Board screen, select DOS ODI2ND...
- 3-Number - 5 Complete the Novell NetWare installation.
- 3-Number - 6 Reboot your system.
- 1-1Head - Installing Adaptec ATM Software for DOS/ Windows
- 3-Start Number - 1 Insert the ANA-59x0 DOS WIN diskette into a flop...
- 3-Number - 2 Change to the drive that contains the ANA-59x0 D...
- 3-Number - 3 At the Welcome To ATM Installation Utility! scre...
- 3-Number - 4 To accept the default drive:\directory installat...
- 3-Number - 5 At the INSTALLATION COMPLETE! screen, press Ente...
- 3-Number - 6 At the Welcome To ATM Installation Utility! scre...
- 3-Number - 7 At the LEC_AUTO_CFG screen, select one of the fo...
- 3-Number - 8 If you selected options 1 or 3 in the previous s...
- 3-Number - 9 If C:\WINDOWS is the name of your Windows direct...
- 3-Number - 10 If C:\NWCLIENT is the name of your NetWare Clie...
- 3-Number - 11 At the CONFIGURATION COMPLETE! screen, press En...
- 1-1Head - Using Frame Types with Novell NetWare
- 1-1Head - Configuring the Novell NetWare Client Kit for DOS/...
- 0-Chap Title - Installing ATM Software for DOS/Windows 3.1
- 0-Chap Number - 7
- 0-Chap Title - Installing ATM Software for Windows 95
- 1-1Head - Automatically Installing Adaptec ATM Software for ...
- 3-Start Number - 1 Start Windows 95.
- 3-Number - 2 Select Driver from disk provided by hardware man...
- 3-Number - 3 Insert the Adaptec LANE Driver Windows 95 disket...
- 3-Number - 4 Insert your Windows 95 CD-ROM in a CD-ROM drive ...
- 3-Number - 5 Type the following command in the Copy files fro...
- 3-Number - 6 Click Yes to restart your computer.
- 1-1Head - Installing Adaptec ATM Client Drivers for Windows ...
- 3-Start Number - 1 Click the Start button, click Settings, and then...
- 3-Number - 2 Double-click the Network icon.
- 3-Number - 3 Click Add.
- 3-Number - 4 Select Adapter from the list, and click Add.
- 3-Number - 5 Click Have Disk.
- 3-Number - 6 Insert the Adaptec ALANE Drivers for Windows 95 ...
- 3-Number - 7 Select one of the following from the Models list...
- 3-Number - 8 Click OK.
- 3-Number - 9 Insert your Windows 95 CD-ROM in a CD-ROM drive ...
- 3-Number - 10 Type the following command in the Copy files fr...
- 3-Number - 11 Click Yes to restart your computer.
- 1-1Head - Configuring the Adapter
- 1-1Head - Removing Adaptec ATM Software for Windows95
- 1-1Head - Automatically Installing Adaptec ATM Software for ...
- 0-Chap Title - Installing ATM Software for Windows 95
- 0-Chap Number - 8
- 0-Chap Title - Installing ATM Software for Novell NetWare
- 1-1Head - Installing Adaptec ATM Software for NetWare 3.12
- 1-2Head - Installing the ATM Software
- 3-Start Number - 1 Boot the server.
- 3-Number - 2 Insert the ALANE Driver for Novell NetWare v1.0 ...
- 3-Number - 3 At the server system console prompt, type the fo...
- 3-Number - 4 Enter the following command, and press Enter:
- 3-Number - 5 In the Install screen, press Esc to install the ...
- 3-Number - 6 From the Select Operation menu, select Default I...
- 3-Number - 7 When the Install screen appears
- 3-Number - 8 To exit the installation program, press Esc.
- 1-2Head - Configuring the ATM Software
- 1-2Head - Installing the ATM Software
- 6-2Cntr Cell - 0
- 6-2Cntr Cell - on
- 6-2Cntr Cell - 30
- 6-2Cntr Cell - 30
- 6-2Cntr Cell - no
- 6-2Cntr Cell -
- 6-2Cntr Cell -
- 6-2Cntr Cell - default
- 3-Number - 5 Save and exit the file.
- 1-2Head - Automatically Loading the ATM Driver
- 1-2Head - Automating ATM Software Installation
- 1-1Head - Installing, Configuring, and Loading Adaptec ATM S...
- 1-2Head - Installing and Configuring the ATM Software While ...
- 3-Start Number - 1 Begin the procedure for installing Novell NetWar...
- 3-Number - 2 When the Choose the Server Drivers - Network Dri...
- 3-Number - 3 Insert the ALANE Driver for Novell NetWare v1.0 ...
- 3-Number - 4 If the diskette is in drive A, press Enter. If t...
- 3-Number - 5 From the Select a driver to install menu, select...
- 3-Number - 6 From the Board ALANE_1 (Driver ALANE) Actions me...
- 3-Number - 7 Press F3 to manually set IPX frame types.
- 3-Number - 8 From the Frame Type List, select the appropriate...
- 3-Number - 9 In the ALANE_1 Parameters section, configure the...
- 1-2Head - Installing and Configuring the ATM Software While ...
- 6-2Cntr Cell - 1516
- 6-2Cntr Cell - 0
- 6-2Cntr Cell - on
- 6-2Cntr Cell - 30
- 6-2Cntr Cell - 30
- 6-2Cntr Cell - no
- 6-2Cntr Cell - default
- 3-Number - 10 From the Board ALANE_1 (Driver ALANE) Actions m...
- 3-Number - 11 Complete one of the following steps:
- 3-Number - 12 In the Choose the Server Driver - Summary scree...
- 3-Number - 13 Continue with the Novell NetWare 4.1 installati...
- 1-2Head - Installing and Configuring the ATM Software After ...
- 3-Start Number - 1 Boot the server.
- 3-Number - 2 At the server system console prompt, type the fo...
- 3-Number - 3 From the Installation Options menu, select Drive...
- 3-Number - 4 From the Driver Options menu, select Configure n...
- 3-Number - 5 From the Additional Driver Actions list, select ...
- 3-Number - 6 At the Select a driver menu, press Insert to ins...
- 3-Number - 7 Press F3 to specify another path.
- 3-Number - 8 In the Specify a directory path screen, type the...
- 3-Number - 9 Insert the ALANE Driver for Novell NetWare v1.0 ...
- 3-Number - 10 From the Select a driver to install menu, selec...
- 3-Number - 11 At the Do you want to copy driver ALANE.LAN?, s...
- 3-Number - 12 From the Board ALANE_1 (Driver ALANE) Actions m...
- 3-Number - 13 Press F3 to manually set IPX frame types.
- 3-Number - 14 From the Frame Type List, select the appropriat...
- 3-Number - 15 From the ALANE_1 Protocols menu, select any oth...
- 3-Number - 16 In the ALANE_1 Parameters section, configure th...
- 6-2Cntr Cell - 1516
- 6-2Cntr Cell - 0
- 6-2Cntr Cell - on
- 6-2Cntr Cell - 30
- 6-2Cntr Cell - 30
- 6-2Cntr Cell - no
- 6-2Cntr Cell - default
- 3-Number - 17 From the Board ALANE_1 (Driver ALANE) Actions m...
- 3-Number - 18 At the system prompt, type your IPX network num...
- 3-Number - 19 Complete one of the following steps:
- 3-Number - 20 From the Additional Driver Actions menu, select...
- 3-Number - 21 From the Driver options menu, select Return to ...
- 3-Number - 22 From the Installation Options menu, select Exit...
- 3-Number - 23 From the Exit INSTALL menu, select Yes and pres...
- 1-1Head - Automatically Loading the ATM Driver
- 1-1Head - Manually Loading the ATM Driver
- 1-1Head - Removing ATM Software
- 1-2Head - Removing ATM Software for NetWare 3.12
- 1-2Head - Removing ATM Software for NetWare 4.1
- 3-Start Number - 1 Boot the server.
- 3-Number - 2 At the server system console prompt, type the fo...
- 3-Number - 3 From the Installation Options menu, select Drive...
- 3-Number - 4 From the Driver Options menu, select Configure n...
- 3-Number - 5 From the Additional Driver Actions list, select ...
- 3-Number - 6 From the Selected Network Drivers menu, select t...
- 3-Number - 7 From the Unload driver anyway? menu, select Yes....
- 3-Number - 8 When the message screen appears, press Enter.
- 3-Number - 9 From the Additional Driver Actions menu, select ...
- 3-Number - 10 From the Driver options menu, select Return to ...
- 3-Number - 11 From the Installation Options menu, select Exit...
- 3-Number - 12 From the Exit INSTALL menu, select Yes and pres...
- 1-1Head - Updating ATM Software
- 1-1Head - Troubleshooting
- 1-1Head - Identifying Files
- 1-1Head - Installing Patches
- 1-1Head - Installing Adaptec ATM Software for NetWare 3.12
- 0-Chap Title - Installing ATM Software for Novell NetWare
- 0-App Number - A
- 0-App Title - Product Features and Specifications
- 1-1Head - Features
- 6-2Cntr Cell - ANA5910
- 6-2Cntr Cell - 100 m
- 6-2Cntr Cell - 25.6
- 6-2Cntr Cell - ANA5930
- 6-2Cntr Cell - 100 m
- 6-2Cntr Cell - 155.0
- 6-2Cntr Cell - ANA5940
- 6-2Cntr Cell - 2 km
- 6-2Cntr Cell - 155.0
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - 1
- 6-2Cntr Cell - Transmit A
- 6-2Cntr Cell - Receive A
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - 2
- 6-2Cntr Cell - Transmit B
- 6-2Cntr Cell - Receive B
- 6-2Cntr Cell - Transmit A
- 6-2Cntr Cell - Receive A
- 6-2Cntr Cell - 3
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - Receive A
- 6-2Cntr Cell - Transmit A
- 6-2Cntr Cell - 4
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - Receive B
- 6-2Cntr Cell - Transmit B
- 6-2Cntr Cell - 5
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - Transmit B
- 6-2Cntr Cell - Receive B
- 6-2Cntr Cell - 6
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - 7
- 6-2Cntr Cell - Receive A
- 6-2Cntr Cell - Transmit A
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - Unused
- 6-2Cntr Cell - 8
- 6-2Cntr Cell - Receive B
- 6-2Cntr Cell - Transmit B
- 0-App Title - Product Features and Specifications
- 0-App Number - B
- 0-App Title - Windows NT Specific Error Messages and Diagnostics...
- 1-1Head - Error Messages
- 1-3Head - User Error Messages
- 1-2Head - Diagnostics Error Messages
- 1-2Head - Driver Console Error Messages
- 1-2Head - Diagnostics
- 3-Start Number - 1 Make sure you have installed the adapter and the...
- 3-Number - 2 Select the MS-DOS Command Prompt icon in the Mai...
- 3-Number - 3 Change to the directory where ATM software is in...
- 3-Number - 4 Stop all the drivers that are running. See Datab...
- 3-Number - 5 Start the diagnostic utility by entering the fol...
- 3-Number - 6 Execute the adapter selftest by entering the fol...
- 3-Number - 7 Execute the extended SAR memory test by entering...
- 3-Number - 8 To execute an optional external test, follow the...
- 3-Number - 9 Exit the diagnostic program:
- 3-Number - 10 If all the diagnostic tests passed, restart the...
- 1-2Head - Database File Parameters
- 1-2Head - SNMP Agent
- 1-1Head - Error Messages
- 0-App Title - Windows NT Specific Error Messages and Diagnostics...
- 0-Other Title - Glossary
- 9-GLetter - Acronyms
- 9-GTerm2 - AAL
- 9-GTerm2 - ANSI
- 9-GTerm2 - API
- 9-GTerm2 - ARP
- 9-GTerm2 - ASIC
- 9-GTerm2 - ATM
- 9-GTerm2 - B-ISDN
- 9-GTerm2 - BEPCR
- 9-GTerm2 - CBR
- 9-GTerm2 - CCITT
- 9-GTerm2 - CL
- 9-GTerm2 - CLP
- 9-GTerm2 - DMA
- 9-GTerm2 - EPROM
- 9-GTerm2 - ESI
- 9-GTerm2 - ETSI
- 9-GTerm2 - GUI
- 9-GTerm2 - IEEE
- 9-GTerm2 - IETF RFC
- 9-GTerm2 - ILMI
- 9-GTerm2 - IP
- 9-GTerm2 - IPX
- 9-GTerm2 - ISDN
- 9-GTerm2 - ISO
- 9-GTerm2 - LAN
- 9-GTerm2 - LATA
- 9-GTerm2 - LED
- 9-GTerm2 - LIS
- 9-GTerm2 - MAC
- 9-GTerm2 - MAN
- 9-GTerm2 - MBS
- 9-GTerm2 - MIB
- 9-GTerm2 - MMF
- 9-GTerm2 - MTU
- 9-GTerm2 - NIC
- 9-GTerm2 - NMS
- 9-GTerm2 - NNI
- 9-GTerm2 - OAM
- 9-GTerm2 - P-NNI
- 9-GTerm2 - PCI
- 9-GTerm2 - PCR
- 9-GTerm2 - PDU
- 9-GTerm2 - PHY
- 9-GTerm2 - PMD
- 9-GTerm2 - PTI
- 9-GTerm2 - PVC
- 9-GTerm2 - QoS
- 9-GTerm2 - RFC
- 9-GTerm2 - Rx
- 9-GTerm2 - SAR
- 9-GTerm2 - SCR
- 9-GTerm2 - SDH
- 9-GTerm2 - SEAL
- 9-GTerm2 - SMF
- 9-GTerm2 - SNMP
- 9-GTerm2 - SONET
- 9-GTerm2 - STM
- 9-GTerm2 - STM -n
- 9-GTerm2 - STP
- 9-GTerm2 - STS
- 9-GTerm2 - SUNI
- 9-GTerm2 - SVC
- 9-GTerm2 - T1
- 9-GTerm2 - T3
- 9-GTerm2 - TC
- 9-GTerm2 - TCP
- 9-GTerm2 - Tx
- 9-GTerm2 - UDP
- 9-GTerm2 - UME
- 9-GTerm2 - UNI
- 9-GTerm2 - UTP
- 9-GTerm2 - UU
- 9-GTerm2 - VBR
- 9-GTerm2 - VC
- 9-GTerm2 - VCC
- 9-GTerm2 - VCI
- 9-GTerm2 - VPC
- 9-GTerm2 - VPI
- 9-GLetter - Glossary of Terms
- 9-GLetter - A
- 9-GLetter - B
- 9-GLetter - C
- 9-GLetter - D
- 9-GLetter - E
- 9-GLetter - G
- 9-GLetter - H
- 9-GLetter - I
- 9-GLetter - L
- 9-GLetter - M
- 9-GLetter - N
- 9-GLetter - O
- 9-GLetter - P
- 9-GLetter - Q
- 9-GLetter - R
- 9-GLetter - S
- 9-GLetter - T
- 9-GLetter - U
- 9-GLetter - V
- 9-GLetter - W
- 9-GLetter - Acronyms
- 0-Other Title - Index
- GroupTitlesIX - A
- GroupTitlesIX - B
- GroupTitlesIX - C
- GroupTitlesIX - D
- GroupTitlesIX - E
- GroupTitlesIX - F
- GroupTitlesIX - H
- GroupTitlesIX - I
- GroupTitlesIX - L
- GroupTitlesIX - M
- GroupTitlesIX - N
- GroupTitlesIX - O
- GroupTitlesIX - P
- GroupTitlesIX - Q
- GroupTitlesIX - S
- GroupTitlesIX - T
- GroupTitlesIX - U
- GroupTitlesIX - V
- GroupTitlesIX - W