Number - 11 click yes to restart your computer, 1head - configuring the adapter, Number - 2 double-click the network icon – Adaptec 5ANA-940 User Manual
Page 88: Number - 3 click properties, Configuring the adapter 7-4, Configuring the adapter
7-4
ANA-5910/5930/5940 User’s Guide
10
Type the following command in the Copy files from text box
drive:\win95
where
drive:
is the location of the CD-ROM/diskette, and click
OK
.
A Copying Files… progress indicator appears followed by the
System Settings Change help message box.
11
Click Yes to restart your computer.
Configuring the Adapter
To configure the Adaptec LANE adapter
1
Click, Start button, click Settings, and then click Control
Panel
.
2
Double-click the Network icon.
The Network dialog box appears.
3
Click Properties.
One of the following dialog boxes appears:
Adaptec LANE Adapter - ANA 59x0 (ELAN 1) Properties
Adaptec LANE Adapter - ANA 59x0A (ELAN 1) Properties
4
Click the Advanced tab, select a setting from the Property list,
and specify values as follows:
Property
Value
ELAN Name
Provide a name if the client’s LECS requires
ELAN name registration. If the switch
supports this feature, select the text box and
type a character string (no spaces);
otherwise, select Not Present.
ELAN Number
The list contains the number automatically
assigned to the LAN during installation. The
ANA-5910/5930/5940 supports up to four
emulated LANs, numbered 0–3. You cannot
change this value.
LAN Type
Select a value from the list. Only Ethernet
(802.3) is currently supported.