2head - connecting to the ana5910, Start number - 1 obtain the connecting cable, Connecting the ana-5910/5930/5940 adapter to the – Adaptec 5ANA-940 User Manual
Page 26: Network 3-4, Connecting to the ana-5910 3-4, Connecting to the ana-5910
3-4
ANA-5910/5930/5940 User’s Guide
Connecting the ANA-5910/5930/5940 Adapter to
the Network
Before you can use your ANA-5910/5930/5940 adapter, you must
connect it to an ATM switch.
Connecting to the ANA-5910
Note:
The RJ-45 connector pinout on the adapter conforms
with the IBM de facto standard. If your switch connector
pinout is not compatible with this standard, obtain or create
a cable to convert to the required pinout.
To connect the ANA-5910 to an ATM switch:
1
Obtain the connecting cable.
2
Connect the RJ-45 connector at one end of the cable to the RJ-45
socket on the ANA-5910.
3
Connect the RJ-45 connector at the other end of the cable to the
ATM wall port or directly to the RJ-45 socket on the ATM
switch, as illustrated in Figure 3-3. See your system
administrator for assistance.
Figure 3-3. Connecting the UTP/STP Cable to the ATM Switch