3head - removing the cip arp server, Number - 4 select yes – Adaptec 5ANA-940 User Manual
Page 60
5-12
ANA-5910/5930/5940 User’s Guide
Make changes as described in the installation section.
4
Select Close to exit the Network Settings dialog box.
5
Select Yes to save and initialize changes.
Removing the CIP ARP Server
1
From the Control Panel window, double-click on the Network
icon.
2
From the Network Settings dialog box, select the Service tab.
3
Select AARP Server and then select Remove.
4
Select Yes.
5
In the Network Settings dialog box, select Close.
6
Select Yes to save and initialize changes.
This manual is related to the following products: