Adaptec 5ANA-940 - Manual (Page 131)

B-13
Windows NT Specific Error Messages and Diagnostics
7 Execute the extended SAR memory test by entering the
following command from the
ADM:0> prompt:
ADM:0> sar_mem_e
Extended Segmentation and Reassembly Tests
PASSED
8 To execute an optional external test, follow these steps:
a Remove the ATM cable from the adapter’s ATM connector
(if one is already connected).
b Place an external ATM loopback cable on the adapter’s ATM
connector. Obtain this cable from your cable vendor.
c Test the external ATM connection to the adapter by entering
the command from the
ADM:0> prompt:
ADM:0> atm_external
ATM External Tests
PASSED
d Remove the loopback cable and reconnect the adapter to
your ATM switch.
9 Exit the diagnostic program:
ADM:0> quit
10 If all the diagnostic tests passed, restart the drivers you need.