Adaptec 5ANA-940 - Manual (Page 73)

5-25
Installing ATM Version 2.0x Drivers for Windows NT
Using Device Drivers and Utilities
Stopping ATM Drivers
To stop ATM driver:
Note: PVCs and other configuration information not stored
in the database files are lost when you stop the drivers.
1 If your path is not set up, change to the directory where you
installed the software.
2 Stop the driver using the appropriate command below and in
the following order:
Starting ATM Drivers
To start the ATM driver:
1 In the Program Manager’s Main group window, select the
MS-DOS Command Prompt
icon.
The Command Prompt window appears.
2 Change to the directory where you installed the software.
alanecnfg -s stops the alane.sys driver
acipcnfg -s stops the Classical IP portion of the
atmo.sys driver
aarpcnfg -s stops the aarp.sys driver (only needed on
the ATMARP server)
aatmcnfg -s stops the atmo.sys driver