A2 introduction, A3 instrument set-up, Scope of delivery – Hach-Lange SPECTRO COLOR d-8 User Manual
Page 4

BDA 387/2
5
A2 Introduction
spectro-color
®
is a colorimeter operating on the spectral method described in DIN 5033 using
the d/8° circular viewing geometry, i.e. the sample is illuminated with polychromatic light with
the optical unit observing the reflected light from a 8° position towards the sample surface.
spectro-color
®
is a genuine grating colorimeter measuring the visible spectral range (400nm
to 700nm) at intervals of 10nm. A special reference beam system ensures highly reproducible
measurings. All measured values are saved and displayed digitally. A variety of international
colorimetric standards can be selected at the instrument. The
results can be printed via optional printer or transmitted to a PC
via interface. An optional PC-software is available to provide
single measuring values, entire set-off measurements or
statistical evaluations in listings or telling graphical displays. All
values can be calculated for 2° and 10°-standard observers
under several illuminants. For optional accessories see chapter
E1
Scope of Delivery
1.
spectro-color
®
2.
Black and White standard LZM 268 with certificate
3.
Operating Instructions BDA 386/387 (D/GB)
4.
4 pcs. rechargeable batteries, type AA
5. Transport
box
A3 Instrument
Set-Up
Unpack the instrument carefully and check the delivery for missing parts (delivery note) or
transport damages.
How to change the language: Turn on spectro-color
®
. The warning „Instrument not
calibrated for 24 hours!“ appears in German language. Press key
× , Press key Ø Press
key
Ø four times to select
Einstellungen
and confirm with ok . Press key
Ø several
times to select
Sprache
. Press key ok to change the language. Go to the desired
language with key
Ø and confirm with ok .
As spectro-color
®
is a sophisticated optical measuring system, avoid the following under all
circumstances:
• Do not use the instrument in direct sunlight.
• Do not allow water of inflammable and metallic objects to enter the instrument.
• Do not use the instrument in excessively moist, dusty or vibrating surroundings.
• Do not open the instrument. There are no parts in the housing for the user to check.
• If you have any questions or problems, please contact our service department.