Hach-Lange SPECTRO COLOR d-8 User Manual

Page 23

BDA 387/2

C4 Memory

spectro-color

can store up to 1000 measurements. The stored values are available for later

printing or loading to a PC (optional QC-software).

At item [Memory] you can activate or deactivate

(on or off) the memory and print or clear the

contents. This item comes at [value memory] in

the main configuration menu. Then you see the

menu shown on the right.

C4.1 Memory

activation

Press key

× or Ø to select [aktiv].

Press key ok to activate the memory. All following measurements are stored in the

instrument.

With a barcode reader, the reference values can be scanned directly from the barcode.

Attention: Clear memory before first use (see C4.4).

C4.2 Memory

deactivation

Press key

× or Ø to select [passive]. Press key ok to deactivate the memory.

C4.3 Memory

printing

Identical to the example of C4.1, but selecting „print“.

Printing can only be done with a Hach Lange printer. Connect spectro-color

and printer with

the cable enclosed. When the printer is ready for operation, select „print“. The memory is

printed in the order of measurements. The contents of the memory can be printed repeatedly

until it is cleared.

C4.4 Memory

clearance

Identical to the example of C4.1, but selecting „clear“. Clearance is acknowledged with a

beep and the display reading „ready“ (takes some seconds).

Memory

active
passive
print
clear