Clear-Com CB-222 - Manual (Page 9)

5 T-Desk Reference Manual
BaseStation Settings Tab
The BaseStation Settings tab displays all settings related to the selected BaseStation and real-time status of its associated
BeltStations that are logged in at that point in time. From this tab, you can view and access BeltStations or load previously
saved profiles to the BaseStation or the BeltStation(s). In addition, you can access the wired intercom and auxillary audio
levels, relays, stage announce and call features, mic gain and mic kill settings, sidetone, or front panel display options.
System Status
The System Status sub-tab displays the current BaseStation operating mode and the status of all BeltStations (up to five) that
are associated (and logged into) the currently selected BaseStation. This information includes the name of the BeltStation,
talk channels enabled and in use, battery level and alert, RF signal strength, and relay status (if any) for each BeltStation. In
addition, there are three active buttons per each registered BeltStation. By clicking the button with the “BeltStation name”
displayed, you are routed to the BeltStation Settings tab where you can adjust settings specific to that BeltStation. The “Mic
Kill” button will de-latch the Talk button(s) for that particular BeltStation. The BeltStation user can re-enable the talk button at
any time. The “Call Belt” button initiates a call signal to that specific BeltStation.