Clear-Com CB-222 - Manual (Page 8)

4 T-Desk Reference Manual
T-Desk Overview
1. BaseStation Navigation Pane - all LAN connected BaseStations will be listed on the left side of the screen in the
BaseStation Navigation Pane. Any of the BaseStations on the LAN can be selected for monitoring or optimizing. The
selected BaseStation is highlighted in yellow and others are listed on individual buttons with a gray background.
A colored ball to the left of the BaseStation name indicates the status of the LAN connection – green for a good
connection and red for a weak connection. BaseStations are not required to be named but descriptive names make
managing multiple systems easier. You can rename BaseStations under the Tech Menu tab. The pane will remain
visible at all times from any tab.
2. Tabs - tabs are utilized throughout T-Desk to jump from screen-to-screen. T-Desk consists of primary system tabs
and then sub-tabs within each screen. The tabs across the top of the screen include the BaseStation Settings tab,
the BeltStation Settings tab, the Tech Menu tab, and the All Systems tab. By clicking on a tab, you advance to the user
interface screen of that tab. Under each primary system tab, there are a series of sub-tabs which will direct you to
specific system settings, features, information, and individual BeltStations (in the case of the BeltStation Settings tab).
3. Dashboard Status Bar - this is located along the bottom of the T-Desk window in every tab with the exception of
the All Systems tab. In this tab the status bar does not appear. The Dashboard displays a continuous snapshot of
several system-wide settings as well as hosting a set of “Mic Kill” buttons for each intercom channel. All items
are informational with the exception of the “Mic Kill” buttons which will disable any open mic that resides on the
associated button you click (Ch A, Ch B, Ch C, Ch D, or All Ch).
MONITOR STATUS
BeltStation Battery Alert: OK/CHECK
Base Power Supply: AC/DC
Base Antenna: Local/Remote
Base Sync: Internal/External
Channels A&B 2-Wire: RTS/ClearCom/Bal
Channels C&D 2-Wire: RTS/ClearCom/Bal
Frequency: 2.4GHz/900MHz
Mic Kill: A/B/C/D/All
1
2
3