Basestation information – Clear-Com CB-222 User Manual
Page 16
12
T-Desk Reference Manual
BaseStation Information
This sub-tab is used for informational purposes only. It displays system information for the radio, LAN, Hardware versions, and
Firmware versions of the selected BaseStation. This information cannot be adjusted from T-Desk, but some of the parameters
are configurable in the Tech Menu of the BaseStation.
y
Radio Configuration - proper configuration of the radio is critical for optimal performance of the Tempest Wireless
system. Failure to operate in the proper frequency band can have significant legal implications. The Radio Configuration
information should never be changed during normal operation.
y
BaseStation LAN Information - the information relating to the Local Area Network (LAN) settings is normally obtained
automatically if using a router or switch device. These IP addresses are key when using T-Desk with Tempest Wireless.
y
Firmware Versions - this information can be useful during times of technical support or when determining if a firmware
upgrade is needed.
Note: This is only the BaseStation firmware, not the corresponding BeltStations. You must go into the BeltStation menu to view the
firmware.
y
Hardware Versions - this information is not important to the end user. It may be needed in times of technical support.