Clear-Com CB-222 - Manual (Page 14)

10 T-Desk Reference Manual
BeltStation Settings Tab
The BeltStation Settings tab displays five sub-tabs that represent the BeltStation slots and will display up to five BeltStations
logged into the corresponding BaseStation. The sub-tabs will be named according to the BeltStation name. Click on any of the
individual sub-tabs to adjust individual settings for that BeltStation.
y BeltStation Name - displays the BeltStation name and a snapshot of the BeltStation’s talk channels enabled and in use,
battery level and alert, RF signal strength, and relay status (if any).
y Talk A/B or C/D Button - the Talk button(s) can be set to latching, momentary or disabled mode.
y Stage Announce - the Stage button is limited to momentary or disabled mode; the Stage relay option can be enabled or
disabled. Note: The Stage Relay is in addition to the five BaseStation relays.
y Channel Select A/B or C/D - a user can set each channel knob independently. The channels can be set to talk and listen to
both channels simultaneously, talk and listen on one channel only, or neither of the channels.
y Delay Switch - if enabled requires the channel knob to be pressed and held for a second before the channel will change.
y Talk Tones - when enabled the user will hear a tone through their headset when their Talk button is pressed.
y Individual Relay - sets the relay options:
» Relay Number - determines which BaseStation relay will be triggered.
» Trigger - assigns which button on the BeltStation will initiate the relay action.
y Roaming Bias - determines how frequently a BeltStation searches for another BaseStation when Roaming is enabled.
y Call On Talk - when enabled each BeltStation can trigger a call alert on its current active channel via the TALK button.
y Volume Limits - each BeltStation is capable of its own maximum and minimum volume level. Use the slider bar to adjust
the levels accordingly. Note: The maximum volume cannot be set below the minimum volume.
y Volume Press - if enabled the volume knobs must be pressed, then turned when making adjustments to volume levels.
y Call Button - set to Enable to activate the call feature on the BeltStation.
y Call Alert - this option determines how a call signal will be received by the BeltStation; choose from an Audible tone,
vibrate, both or disable.
y Wireless ISO - this feature (when enabled) allows the user to press ENTER and talk only to the wireless users.
y Sidetone - adjusts the Sidetone volume level (dB) for the BeltStation.
y Mic Gain - adjusts the Mic Gain level (dB) for the BeltStation.
y Shared Audio - this feature controls whether the user will hear any return audio when operating in Shared Mode.
y Low Battery - when enabled the BeltStation will generate an audible alert in the headset when the battery reaches 10%
charge.
y LED Brightness - controls the brightness of the talk LEDs on top of the BeltStation.
y LCD Backlight - turns the BeltStation display screen backlight on or off.
y Menu Lock - if enabled it allows the BeltStation menu to be locked.