Acnodes PC6172 - Manual (Page 55)

14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PC6172
17” industrial Core 2 Duo Panel PC
SOFT-OFF BY PWR-BTTN:
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state when
the system has "hung". The choices are Delay 4 Sec and Instant-Off.
PWRON AFTER PWR-FAIL:
This item allows you to select if you want to power on the system after power failure. The choice: Off
and On
4-8 PNP/PCI Configuration
Choose “PNP/PCI CONFIGURATION” from the main menu, a display will be shown on screen as
below:
Phoenix - AwardBIOS CMOS Setup Utility PnP/PCI Configurations
PNP/PCI Configuration Setup Screen
The PNP/PCI Configuration Setup describes how to configure PCI bus system. PCI, also known as
Personal Computer Interconnect, is a system, which allows I/O devices to operate at speeds
nearing the speed of the CPU itself uses when communicating with its own special components.
This section covers technical items, which is strongly recommended for experienced users only.
RESOURCE CONTROLLED BY:
The Award Plug and Play Bios can automatically configure all of the booth and Plug and Play-com-
patible devices. However, this capability means absolutely nothing unless you are using a Plug and
Play operating system such as Windows 95. By choosing "manual", you are allowed to config-
ure the IRQ Resources and DMA Resources.
IRQ RESOURCES:
The options for these items are found in its sub menu. By pressing the NTER> key, you are
prompt to enter the sub menu of the detailed options as shown on next page: