Hellwig Air 6299 - Manual (Page 4)

3. Place retaining plate on top of rail as shown. Locate frame bracket on coil
spring seat as shown with the notch pointing outboard. Insert 1/2 x 2-1/2 UNC
bolt through hole in frame bracket and tighten into threads in frame plate. Align
bracket to be square with the frame and axle and tighten bolt to 35 ft-lb.
Attach frame bracket to re-
tainer plate with 1/2x2-1/2”
bolt through hole in bracket
and engage threaded hole in
plate.
Place retainer plate on
top of frame so that axle
bracket can be retained
by 1/2” bolt
Place frame bracket over
coil spring seat
6299 ( R-6299) 02/26/2010