Hellwig Air 6299 - Manual (Page 16)

559-734-7451 800-367-5480 FAX 559-734-7460
18. Connect air springs to leveling valve as shown. Tie strap hoses as required to avoid con-
tact with exhaust and chafing on frame.
17. Route 12 ga and 16 ga electrical wires from compressor to engine compart-
ment along driver’s side frame rail. Make sure to fasten wires securely to existing
wire harness.
Follow plumbing and wiring diagram for connection of leveling valve,
compressor, and relay. Take care when routing air and electrical lines that they will
not be crimped or chafed during installation or use. Deviation from the electrical dia-
gram and failure to use an inline fuse holder (supplied) will void warranty. DO NOT
install fuse in inline fuse holder until all connections and circuits are verified to be com-
pleted correctly.
From air tank
To Air Springs
6299 ( R-6299) 02/26/2010