beautypg.com

Part c compressor installation – Hellwig Air 6299 User Manual

Page 13

background image

559-734-7451 800-367-5480 FAX 559-734-7460

Part C Compressor Installation

14. Prepare the compressor for mounting by HAND-TIGHTENING the air filter
into the port on the compressor. If necessary, adapters are provided with the
compressor to connect nylon hose from the tank to the compressor hose. Do
not remove the braided hose or check valve from the compressor.

If the vehi-

cle will be operated in a manner where the compressor may draw in water,

the air filter should be remotely mounted in the cab with components in-

cluded with compressor.

Air Filter

Blowoff Valve

1/4” Street Tee

Drain Valve

3/8” Tube X 1/4”
MPT Connector

Reducer

Relay

15. Prepare air tank as shown. Apply pipe sealant or Teflon tape to all fittings
before tightening. .

6299 ( R-6299)

02/26/2010