Fluid Components International 8-66B_12-64B Series Manual Troubleshooting - Manual (Page 4)

FLUID COMPONENTS INTL CHAPTER 5 - TROUBLESHOOTING
Models 12-64/8-66 Basic Switch 5 - 4 Doc. No. 06EN003264 Rev. A
Spares
FCI recommends that one control circuit, part number 5181-XA3A2A2, be kept as a spare. The X in the part
number depends on the input voltage. The X will be a 1 for 115 Vac, 2 for 230Vac or 6 for 24Vdc. Contact FCI for
specific recommendations.
Defective Parts
Before returning any equipment to FCI, obtain an return authorization (RA) number for authorization, tracking, and
repair/replacement instructions. If a return is required, remove the defective part or instrument, replace it with a
spare, calibrate, and then return the defective part or instrument to FCI freight prepaid for disposition.
Customer Service
1. In the event of problems or inquiries regarding the instrument, please contact the Regional or Country
Authorized FCI Field Agent. There is an extensive list of these representatives at the front of this manual.
2. Before contacting the FCI representative, be sure that all the applicable information is near so that a more
effective, efficient and timely response may be provided.
3. Refer to Appendix C for specific Customer Service policy provisions.