ELRO HIS20USB Security & home automation system USERS MANUAL - Manual (Page 5)

5
Main functions you will find under “Home” include:
1-1 Configure Funckey.
1-2 Execute Funckey.
1-3 Show device information.
1-1. Function configuration for Home Box Funckey
Please take note of the following when you configure
Funckey:
1. Home Box Funckeys correspond to specific
Scenes; in order to configure a Funckey, you
must first designate a corresponding Scene.
2. If you have designated a Scene to a specific
Funckey previously, you will not be able to
designate said Scene to another Funckey.
3. To configure a new Scene or maintain an
existing Scene, refer to Setting – Scenes.
Follow the steps described below to reconfigure
Funckeys:
1. Click [Home Page] in the Top Menu.
2. Click on the [All On] icon.
3. The system will display a small function menu above
the icon and you can specify the location of the function
key. In this example, [I] has been chosen and this
means Funckey [I] has been redefined to [All On].
4. After you have reconfigured the Funckey, you will
see [I] hovering over [All On].
5. Remember that after you have finished a
configuration, you must use the Sync function to apply
the new settings to the Home Box in order for the
changes to take effect.