ELRO HIS20USB Security & home automation system USERS MANUAL - Manual (Page 14)

14
Example 2: This is what will happen if you try to skip
ahead to Step2 and have the system execute the
Scenes. In this example, we will select Scene1.
When you go back to Step1, you will find that “System
Trigger” has been made unavailable. This means that
the Scene that was selected previously involve the
change of Home Box security modes.
Step3: Specify the duration of delay time for Action 2 to
be executed.
Example: Setting the delay time to 1 minute before
Action 2 is executed.
Step4: Do Action 2
The steps and rules for Action 2 are identical to what
have been covered for Action 1. Refer to the
descriptions for Action 1 if needed.
If you wish to simplify the configuration process, simply
complete the settings for Step1 and Step2; Steps 3 and
4 are optional.
5-3. Schedule
To create or maintain a Schedule, select [Setting] in the
Top Menu and click [Schedule] in the menu to the left.
To the right, you will find a number of default Schedules
that comes with the system that you can use or refer to.
The system supports up to a maximum of 16
Schedules and once you have reached the cap, the
[Add New Schedule] button will turn grey.
5-3-1. Adding New Schedule
Click [Add New Schedule] when you wish to add a new
Schedule to the system. The system will bring up the
Setting – Schedule – New Schedule window for you to
edit relevant details. For more information on Schedule
maintenance, refer to Section 5-3-2 on “Maintaining