ELRO HIS20USB Security & home automation system USERS MANUAL - Manual (Page 13)

13
22:00)
Example: System Trigger
Step2: Specify the action to be taken when the trigger
has been set off.
You can configure the system to take one of the
following two actions:
1. Control Device: the system will take whatever
action(s) you have configured for Control
Device, including Sound. You can configure
up to 16 actions.
2. Scenes: the system will execute the selected
Scene.
Example: Configuring the system to Control Device
when the trigger has been set off.
Example: Configuring the system to execute a
preselected Scene.
Note: If System Trigger has been set as the source of
trigger, make sure the selected Scene does not involve
actions that will toggle the change of security modes.
When the system identifies such conflicting
configuration, it will disable the Scene and render it
unavailable to the user. Refer to the following example:
Example 1. Using System Trigger
As you can see in this example, all Scenes have been
disabled by the system. This means that all of the
Scenes available involve the change of Home Box
security modes.