Burkert Type 3010 - Manual (Page 6)

4 - 3010
englisch
SYSTEM DESCRIPTION
Application area
The motorised rotary actuator can be used as ON / OFF or as a control drive.
Design
The electrical rotary actuator can be selected to consist of a maintenance-free a.c.
motor or a d.c. motor, flanged to a gearbox in each case, with lifetime lubrication, or a
stepper motor.
The material and design guarantee complete freedom from maintenance, even in
aggressive atmospheres, and a low heat loading of the system.
The control input and the power supply are galvanically separated.
Installation
The installation position is freely selectable, preferably with the drive axis vertical.
Mounting:
- Mount the drive on a standard ISO 5211/FO5 flange (male square) or Bürkert
flange.
- Secure the drive with M6 screws or Ejot PT-screw KA 40 WN 1441 (Bürkert
flange pattern).
ATTENTION!
The drive must not run against or be blocked by an external
stop.