Burkert Type 3010 - Manual (Page 11)

3010 - 9
englisch
PUTTING INTO OPERATION
Safety notes
Before putting the motorised rotary actuator into operation, please ensure that:
• the electrical power supply corresponds to the voltage quoted on the rating plate,
• the electrical connections have been carried out as described in the TECHNICAL
DATA chapter,
• the motorised rotary actuator will only be used in its original configuration, and
that it must not be dismantled.
OPERATION AND FUNCTION
Safety notes
During operation and while running, please ensure:
• compliance with the general technical rules!
• the valid accident prevention and safety regulations for electrical device.
MAINTENANCE
Safety notes
During maintenance and service work, ensure that:
• work on the devices may only be carried out by persons who have been authorised
and have received the corresponding training.
• the devices must be switched free of electrical voltage before the start of the main-
tenance work.
• the national regulations valid in the country of use are complied with.
Service
Check the following within the context of the service work:
• that the connections are firmly seated,
• the plastic body for cracks and other visible damage,
• the maintenance of the permitted temperatures (see the TECHNICAL DATA
chapter),
• the proper functioning of the device.