Burkert Type 3010 - Manual (Page 12)

10 - 3010
englisch
Service intervals
Regularly check that the motorised rotary actuator is in its correct condition with
regard to the mounting, installation and operation.
Take the following factors into consideration when determining the inspection inter-
vals:
• Operating conditions (loading level, incorrect operation),
• the manufacturer's data in the technical documentation (mechanical and electri-
cal service life),
• major changes in the system.
Correction of faults
If you detect faults that that impair the functionality of the motorised rotary actuator,
they must be corrected immediately:
• Place the device out of operation, and switch it free of voltage!
• Correct the fault.
• Put the device back into operation.
TRANSPORT AND STOCKAGE
Transport and storage are only permitted in the original packaging.
DISPOSAL
NOTE Observe the national regulations for the disposal of waste in the
respective country of use.