ADIC FCR 200 - Manual (Page 87)

Perform Configuration 6-15
SCSI-to-Fibre Channel Mapping
Configuration
This option allows modification of the table mapping SCSI
Target:LUN values to Fibre Channel Node:LUN values.
Configuration of these devices is similar to that for indexed
addressing, without the user assists. Prior to configuring these
tables, the user must enable the SCSI target and initiator
addresses desired to enable the mapping for that SCSI device.
Trace Settings Configuration
This option allows trace levels to be set. This should not be
modified in normal operation, as performance degradation
may result.
Further information on using this interface can be later in this
chapter.
Save Configuration
This option saves the current configuration state in FLASH,
and updates the saved previous configuration state.
Restore Last Saved Configuration
This option restores the most recent previously saved
configuration. This can be useful when configuration changes
are made, but the user wishes to return to the previously
configured state.
Trace Setting
Version: X.X.XXXX
Level 0 : On Level 1 : On
Level 2 : Off Level 3 : Off
Level 4 : Off Level 5 : Off
Level 6 : Off Level 7 : Off
U) Update Current Operating Trace Levels
X) Return to previous menu