Unpacking the box, Mounting the fcr200 in a rack, Materials needed – ADIC FCR 200 User Manual
Page 44
4-4
Installation
62-9301-01
Unpacking the Box
1
Remove all items from the shipping container.
Check each one for damage. Keep the FCR200 in the
protective bag until you are ready to install it.
2
Refer to the packing slip or contents list to make
sure you received all the equipment you ordered. If
an item is missing, contact your sales representative
immediately.
3
Select a location that ensures the front intake vents
and rear fan are clear of obstructions so air flows
freely through the router.
4
Do not connect any devices or cables to the FCR200
until the device is secured in a rack or placed
securely on a flat, level surface.
Mounting the FCR200 in a Rack
Follow the directions below to mount the FCR200 in a
standard rack. Slide rails are optional.
Materials Needed:
Figure 4-1
Materials Needed