ADIC FCR 200 - Manual (Page 24)

2-4 Description
62-9301-01
FCR200 Features
Fibre Channel Features
• Fibre Channel initiator and target modes
• Single 1.0625 Gbps port
• Fibre Channel Arbitrated Loop (FC-AL) and Switched
Fabric (FC-SW) topologies
• Private Loop Direct Attach (PLDA) profile compliant
• Class 3 connection with SCSI-FCP protocol
• Optical GBIC
• FC-Tape Compliant
SCSI Bus Features
• SCSI initiator and target modes
• Two auto-negotiating SCSI buses (Narrow, Wide, Fast,
Ultra)
• Ultra Wide SCSI for data transfer up to 40 MB/s per bus
• Connection for up to 30 devices (15 per bus)
• Simultaneous commands, tagged command queuing and
disconnect/reconnect
• Middle of bus configuration with external termination
• SCSI-2 and SCSI-3 protocols
• 68-pin D shell, P type connectors
• Differential or single-ended
• Disk, tape, optical and changer devices
• SCC, Indexed and Automatic addressing modes
Configuration Features
• Serial RJ-11 connector for terminal access
• Ethernet RJ-45 connector for FTP, Telnet and Web
browser access
• Easy field-upgradable firmware
Management Features
• Out-of-band Ethernet TCP/IP
• SNMP with private MIB support