ADIC FCR 200 - Manual (Page 53)

Fibre Channel Connection 4-13
Multi-Mode Fiber Support 1.0625 Gbaud Dual SC
connectors
Single-Mode Fiber Support 1.0625 Gbaud Dual SC
connectors
To connect the FCR200 to the Fibre Channel Storage Area
Network:
1 Locate the Fibre Channel port on the back of the
FCR200.
Figure 4-11 Fibre Channel Port
2 Remove the rubber protector from the GBIC, as
shown in Figure 4-12, and push the metal latch
down to lock it into place.
Figure 4-12 Removal of GBIC Protector