ADIC FCR 200 - Manual (Page 38)

3-6 Safety
62-9301-01
If other then the shipped optical GBICs are used with this
product then the user is required to insure that the optical
GBIC being used meets all of the above requirements. If the
GBIC is not certified then this product’s laser safety
certification becomes null-and-void.
Certifications include one or more of the following:
• Recognized Component by Underwriters Laboratories
• Certified by the Canadian Standard Association
• Certified by VDE (Germany) and/or Certified by Statens
Provningsanstalt (SP) in Sweden
The following shows the Class 1 information label specified in
IEC 825 and CENELEC HD 482 51. This label is attached to
this product.
The following information provides the typical operational
parameters for the Optical Laser GBIC included with the
FCR200.
Parameter Shortwave Longwave
Nomenclature 100-M5-SN-I 100-SM-LC-L
Spectral Centre Wavelength 770-850nm 1300nm
Operating Range 2-500m 2-10km
Launch Power Max 1.3 dBm -3 dBm
Launch Power Min -7 dBm
Receive Power Min -13 dBm -20 dBm
Receive Power Max 1.3dBm -3 dBm
Extinction Ratio 6 dB 9 dB
TX Deterministic Jitter 20 ps 20 ps
Fibre Diameter 50um 9um
Class Multi-mode Single-mode
Class 1 Laser Product
Laser Klasse 1
Luckan 1 Laserlaite