English, 4 soft-start function – Burkert Type TAT002 User Manual
Page 10

8 - 0911
english
Sensor
Lower limit
Upper limit
NTC
-40 °C
110 °C
PTC
-50 °C
150 °C
Pt100
-200 °C
600 °C
TcK
0 °C
1300 °C
TcJ
0 °C
600 °C
TcS
0 °C
1400 °C
MEASUREMENT LIMITS FOR THE SENSOR TYPES
2.4
SOFT-Start function
dSI =
Increase the set-value in steps (in °C or °F; deactivated with 0).
dSt =
Cycle time for the step-by-step increase of the set-value
(1...3600 sec).
drb =
Increasing the set-value (in °C or °F); the function is deactivated with
drb = 0. This value determines the set-value increase in steps in Kelvin
or °F.
drb
Soft-Start range (in °C or °F; deactivated with 0). If the temperature
is outside this range (on both sides of the set-value),
a new SOFT-Start will be initiated.
dSI
Dynamic set-value increase (in °C or °F; deactivated with 0). This
value determines the step-by-step increase of the set-value of SET1.
dSt
Clock time for the dynamic set-value increase (1...999 sec) or dSl
(SOFT-Start).
Ta =
Measured temperature after device commissioning.
t =
Time axis.