Burkert Type 0127 - Manual (Page 3)

english 8
general inFOrmaTiOn
product package
Check immediately upon receipt of delivery that the contents
are not damaged and that they correspond to the type and
quantity as indicated on the delivery note or packing list.
If there are any discrepancies, please contact us immedi-
ately.
Germany
Contact address:
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel.: +49 (0)7940 - 10 91 111
Fax: +49 (0)7940 - 10 91 448
E-mail: [email protected]
International
Contact addresses can be found on the final pages of the
printed operating instructions.
And also on the internet at:
www.burkert.com Bürkert Company Locations
english 9
Warranty
This document contains no promise or guarantee. Please
refer to our general terms of sales and delivery. The warranty
is only valid if the device valve Type 0127 is used as intended
in accordance with the specified application conditions.
The warranty extends only to defects in the Type
0127 and its components.
We accept no liability for any kind of collateral
damage which can occur due to failure or malfunc-
tion of the device.
information on the internet
The operating instructions and data sheets for Type 0127
can be found on the Internet at:
www.burkert.com Documentation Manuals / Data
sheets Type 0127
The complete documentation is also available on CD which
can be ordered by quoting part no. 804625
english 10
sTrucTure and FuncTiOn
Type 0127
modularity
The valve is modular in design and can be supplied with dif-
ferent line connections according to the application case. It
can be used individually and in blocks.
Technical daTa
Operating conditions
Warning!
Risk of injury
Malfunction if used outside!
Do not use Type 0127 outside and avoid heat sources •
which may cause the permitted temperature range to
be exceeded.
Ambient temperature 0 ... +55 °C
Medium temperature FFKM 0 ... +50 °C
FKM 0 ... +60 °C
english 11
Media neutral and aggressive liquids and
gases which do not corrode the
housings and seal materials
technical vacuum
Protection class IP54 with wires and individual device
socket
IP20 with multi-device socket
conformity
CE mark conforms to EMC Directive 2004/108/EEC
mechanical data
Dimensions see data sheet
Housing material PVDF, ETFE, PEEK
Sealing material FFKM, FKM
(EPDM on request)
Type 0127