Apple Color StyleWriter 2500 - Manual (Page 66)

Safety precautions
To prevent damage to the Color StyleWriter 2500 printer and harm to yourself
and other users, follow these safety tips.
m Don’t touch anything inside the printer except as described in the
instructions in this manual. Otherwise, you may damage delicate
mechanical parts.
m Don’t shake ink tanks or hold them with the ink opening pointing down.
Ink can leak out and cause stains.
m Don’t touch the ink opening on an ink tank.
m Don’t oil the inside of the printer.
m Don’t attempt to disassemble the printer.
m Before you unplug the printer, make sure it is turned off. (The green power
light should be off.) Turning the power off ensures that the carrier has
returned securely to its home position and the cartridge has been capped.
The Chooser doesn’t show the Color SW 2500 icon
If you open the Chooser and don’t see the Color SW 2500 icon, you probably
need to install the appropriate printer software. For instructions, see
“Installing Your Printer Software” in Chapter 1.
Installation is unsuccessful
If a message tells you that installation was not successful—or if you have to
repeatedly swap between the same two disks—check to make sure you
restarted your computer with all your software extensions off as explained in
Chapter 1. If that doesn’t work, try removing corrupted fonts or performing a
custom installation, as described in the next two sections.
66 Chapter 5