Flowline LI40-1001 PodView - Manual (Page 5)

Rev A MN204260 5 of 16
GETTING STARTED Step Four
PodView® does not require any configuration. PodView® level indicator will automatically read the
configuration of the attached EchoPod® and display the level per the sensor’s configuration. EchoPod® does
require configuration with the WebCal® software (especially if the relay are to be used). For a copy of
WebCal®, please go to
http://www.flowline.com , click on WebCal® Software and select your language version.
Before attaching PodView® to the EchoPod®, configure the EchoPod® to WebCal® via the LI99‐1001 USB® Fob.
Once the EchoPod® is configured, remove the Fob and attach the PodView®.
Note: Please refer to EchoPod® manual for the wiring, configuration with WebCal® and installation of
EchoPod®.