Flowline DL34 EchoPod - Manual (Page 11)

31 MAR 11 EchoPod 11 of 29
Rev B MN204210
Pump/Valve Action
This feature allows you to select if the pumps or valves will be used
to automatically fill or empty the tank. For 2-Pump/Valve mode,
both devices must be the same (automatic fill or empty). You cannot
set one relay for fill and the other for empty.
o Empties Tank – Will set relay(s) to automatically empty a
tank. Start level will be above the Stop level for each relay.
o Fills Tank – Will set relay(s) to automatically fill a tank.
Start level will be below the Stop level for each relay.
o Not Applicable – Appears when this function is not available
(such as when Switch/Alarms Only or 4-20mA Transmitters
Only are selected).
Empties Tank Fills Tank
(Auto Empty) (Auto Fill)
Note: Right click on any menu that you may have questions on to open the help menu.
Note: To reset, press the Clear Screen button.