Providing production efficiency – FlexLink YOUTILIZE User Manual
Page 22
Providing production efficiency
Page 22 of 125
Figure 18
Click ‘Install’ to start the installation.
Figure 19
Click ‘Finish’ to finalize the installation of the Sentinel Protection Drivers.
At this point you can now plug in the USB hardware key. Once you plug in the key the drivers will
automatically install. You can use Windows Device Manager to verify that the USB hardware key has
been installed and is working properly. In Figure 20 note the presences of ‘SafeNet USB
SuperPro/UltraPro’. If you right click on the SafeNet USB device and select properties you will see
that under Device Status, ‘This device is working properly’ as shown in Figure 21.