Inspection measuring data, Providing production efficiency – FlexLink YOUTILIZE User Manual
Page 116
Providing production efficiency
Page 116 of 125
Inspection measuring data
The measurements points mentioned above are to be measured all over again at the inspection
occasion.
Gap, chain-beam, top
• Measure_Inspection
Gap_top
The inspection value is decreasing due to wear of the components. This wear distance is the sum
of the wear of the slide rail (top) and the chain (top).
Wear (1.1)
Reference
point
Nominal
measure
Inspection
measure
Picture 1: Measure, Gap, chain-beam (top)
Thickness of chain top
• Measure_Inspection
Chain_top
The inspection value is decreasing due to wear of the chain (top).