Software installation for dos/windows 3.1, Automatic installation – EXP Computer HD TRAVELER E PCMCIA (including Win 2000 XP) User Manual
Page 24

- 18 -
SOFTWARE INSTALLATION FOR DOS/WINDOWS 3.1
Automatic Installation
Follow the instructions below to proceed with automatic installation.
1. Insert the device driver diskette into a floppy disk drive on your computer.
2. Change the working directory to the floppy drive containing the device driver diskette by typing A:
then press ENTER.
3. At the DOS prompt (A:\>), type INSTALL followed by the ENTER key.
4. Press
ENTER or click OK button to continue. The screen will display as the following:
1) Directory to install driver: Type the
directory that you want the driver files
are copied to, and then press the TAB
key to forward to the next field.
2) Set I/O port to: The default setting is
320-32F.
5. After completing the selection, press TAB key to the Install button, and press ENTER to continue.
6. The rest of the installation should proceed automatically, the CONFIG.SYS file on your computer
will be updated automatically.
7. Reboot your computer and the hard disk drive will be recognized automatically.