beautypg.com

EXP Computer CDG Game Upgrade User Manual

Page 9

background image

Click on the "Advanced"

Click the "MS-DOS mode"
Click on "Specify a new
MS-DOS configuration"

Click on "OK". Then click
"OK" again. This is the
end of the DOS mode
icon setup.

The Next steps are to configure the DOS mode session for the DOS
drivers that are needed to run the CD-ROM/Game card.

If you have a config.dos and autoexec.dos file on the "C" drive. Just put
the lines that are missing in the corresponding boxes. If you do not have
these files just continue without it. This just means that certain devices
may not function without first loading the DOS drivers for this DOS mode
session.

Double click on the new MS-DOS prompt icon

Click on "YES"

Once the computer is started in this mode, you can then install the DOS
driver.

Run the Installation program for the DOS drivers from EXP’s disk.

More detailed instructions on "SOFTWARE INSTALLATION FOR
DOS/WINDOWS 3.1" can be found under ‘Automatic installation’

To restart Windows 95 normally, type in EXIT at the command prompt
and press "Enter".