EXP Computer CDG Game Upgrade - Manual (Page 5)

SOFTWARE INSTALLATION FOR WINDOWS 95
The following dialog box will appear when you are using the CD-ROM+ card
under Windows 95 for the very first time.
If the dialog box does not appear, either you have to remove the old driver
installed before or the PCMCIA driver is not activated, please refer to the
section titled “Enabling 32-Bit Card Support” or “Removing and
Reinstalling the Driver”.
Select “Driver from disk provided by hardware manufacturer” and click on the
OK button, Windows 95 will then prompt you to insert the manufacturer’s
installation disk. Insert the device driver disk into your floppy drive. Specify
the directory as A:\ or B:\, whichever drive contains the diskette and select
OK.
When the next dialog box appears, select “Portable CD-ROM” or “Portable
CD-ROM + Game “ and click on the OK bottom.
Follow the on-screen instruction to continue. After finishing, you need to
calibrate your joystick or game-pad before you use it.