eLine Technology VL-PIR - Manual (Page 9)

Visible Light PIR Camera OSD Menu Tree eLineTechnology.com
1.Once the SETUP menu screen is displayed, you can choose ‘3DNR’ by using the UP/DOWN
buttons in order to indicate the arrow ‘3DNR’
2.Set the 3DNR mode to ‘ON’ and press the SET button. Then you can adjust the noise reduction
level by using the LEFT/RIGHT buttons.
6. SPECIAL
1.When the SETUP menu screen is displayed. You can choose ’special’ by using the UP or DOWN
buttons so that the arrow indicates ‘SPECIAL’
2.You can select a wanted mode by using the UP and DOWN buttons.
◆
CAM TITLE
If you enter a title, the title will appear on the monitor.
1.Once the SPECIAL menu screen is displayed, please use the UP/DOWN buttons so that the
arrow indicates ‘CAM TITLE’
2. Set in to ‘ON’ by using the Left and Right buttons.
3.Press the SET button.
4.Please use the 4 direction buttons to move to a wanted letter and select the letter by pressing
the SET button. Repeat this to enter multiple letters. You can enter up to 15 letters.
5.Enter a title, move the cursor to ‘POS’ and press the SET button. The entered title appears on
the screen. Select the position to display the title on the screen by using the 4 direction buttons
and press the SET button. Once the position is decided, please select ‘END’ and press the SET
button to return to the SPECIAL menu.