eLine Technology VL-PIR - Manual (Page 7)

Visible Light PIR Camera OSD Menu Tree eLineTechnology.com
4.DAY/NIGHT
You can display pictures in color or black and white.
1.Once the SETUP menu screen is displayed, kindly select ‘DAY/NIGHT’ by using the UP/DOWN
buttons in order to indicate the arrow ‘DAY/NIGHT’.
2.Select a wanted mode by using the LEFT/RIGHT buttons according to the picture display you
want.
● AUTO : The mode is switched to ‘Color’ in a normal circumstance, but switches to ‘BW’ Mode
when ambient illumination is low. To set up the switching time for AUTO mode, press the SET
button. You can turn on or off the burst signal in B/W mode.
DELAY : You can delay a switch time from color mode to B/W mode or from the B/W mode
to color mode.
D→N (CDS) : DAY→NIGHT setting of the CDS value. (48~255)
N→D (CDS) : NIGHT→DAY setting of the CDS value. (0~207)
●
COLOR : The picture is always displayed in color.
● B/W : The picture is always displayed in black and white. You can turn on or off the burst
signal on B/W mode.